Model Making Materials

Brass T sections.

Brass T sections for architectural model making, engineering, frame construction, model railway, dioramas and other scratch building projects.

• T section size: 3.0mm
• T section length: 1000mm

Brass can be milled, drilled, sawed, and soldered.

Cut using a circular saw or manually with a hacksaw. If you don't want to solder, best joined using a two part epoxy or superglue.

Brass forms a greyish-green layer on the surface, which you should remove (sand, polish) before soldering. After polishing, to preserve the shine, apply a clear lacquer to the surface. Our Workshop staff use Hycote Clear Gloss on their brass etching work.