Model Making Materials

+44 (0)20 7264 1288

RECENTLY VIEWED

Liquid solvent cement 500ml

LIQUID SOLVENT CEMENT 500ML (AM00003)

£10.40 inc.VAT
C&C available
Quantity

Liquid solvent cement 500ml.

Solvents dissolve a thin film of each surface to be joined forming a welding joint.

This solvent sticks all normal model making plastics, i.e. perspex, ABS, butyrate, styrene, acrylic etc.

It has a long shelf life, is fast acting (grabs in seconds), and has a water-like consistency so it is best used by holding or clamping the surfaces together and running a loaded brush or applicator along the length of the joint (solvent will be drawn into the joint by capillary action). A second application can be made if required, but is not normally necessary.

When joining dissimilar plastics, i.e. styrene to butyrate, the hardest material (in this case butyrate) should have the joint surface softened, by giving a light coat of solvent, prior to holding the surfaces together. Then proceed as normal.

PlasWeld should be used in a well ventilated area and contact with skin or eyes should be avoided (wash well with water if this occurs).

This product is also available in a 57ml bottle (AM00001).

A syringe and needle is recommended for precise application.

For dispensers and applicators see below.

Legal

It is not possible to transport this item outside mainland UK as it is a hazardous liquid.

4D Model Shop uses cookies to help ensure your experience on our site is the best possible. Click here to read our Privacy Policy.
Please check the box to accept and close