Model Making Materials

Flourette bulb holder CK1019.

These sockets are designed specifically for the CK1018 series of fluorette bulbs. The clip-in type construction allows simple bulb installation and replacement.

The CK1019 is equipped with imbedded nails which automatically make electrical contact with the tape run when pounded in.

To connect using copper tape:

• Run copper tape to location where socket is to be mounted.
• Position cocket over the copper tape as shown in the illustration.
• Tighten the provided screws to ensure a solid connection to the tape wire.
• Install bulb, apply power and check for proper operation.

To connect onto MDF board

• Run tapewire to location where socket is to be mounted.
• Using nails on socket, make indentation marks in copper tape at desired location. Ensure each nail makes contact with its respective copper foil.
• Drill holes at both identification marks.
• Position socket over copper tape.
• Tighten the provided screws to ensure a solid connection to the copper tape.
• Install bulb, apply power and check for proper operation.