Model Making Materials

Brass rectangular tube.

304mm long brass rectangular tubes for architectural model making, engineering, model railway, dioramas and other scratch building projects.

• Brass can be milled, drilled, sawed, and soldered.
• Cut using a circular saw or manually with a hacksaw.
• If you don't want to solder, best joined using a two part epoxy or superglue.
• See the drop down box above for available sizes*.

Brass forms a greyish-green layer on the surface, which you should remove (sand, polish) before soldering. After polishing, to preserve the shine, apply a clear laquer to the surface. Our Workshop staff use Hycote Clear Gloss on their brass etching work.

*PLEASE NOTE: measurements given are outer measurements.