Model Making Materials

Mold Star 20T

2lbs / 0.90kg

Mold Star 20T is an easy to use Shore 20A translucent platinum silicone that is mixed 1A:1B by volume (no weighing scale necessary). It features a relatively low viscosity and vacuum degassing is not required for most applications. Pot life is 6 minutes and cure time is 30 minutes at room temperature.

Mold Star 20T cures in to a soft, strong rubber that is tear resistant and exhibits very low long term shrinkage.

Moulds made with Mold Star will last a long time in your mould library and are good for casting wax, gypsum, resins, concrete and other materials.

Mold Star 20T silicone can be thickened with Thi-Vex® thickener for brush-on application and effects.

Mold Star 20T is heat resistant up to 232°C (450°F) and is suitable for casting low-temperature melt metal alloys.

Note: This product will not cure against surfaces containing sulfur, even when sealed. Use IPA Isopropyl to clean up any uncured material.

• Pot life: 6 mins
• Demould: 30 mins
• Shore hardness: 40A
• Data sheet
• H&S sheet