Model Making Materials

Crystal Clear 200.

Crystal Clear resin is water-white clear and made specifically for applications that require absolute clarity is required.

This rigid urethane casting resin differs from Crystal Clear 202 in working and demould times. Low viscosity ensures easy mixing and pouring.

Crystal Clear products cure at room temperature with negligible shrinkage.

Cured castings are UV Resistant and are not brittle. Vibrant colours and colour effects are achieved by adding SO-Strong colour tints.

Applications include encapsulation, making prototype models, lenses, sculpture reproductions, decorative cast pieces, jewellery, prototype models, special effects and props.

Heat curing is essential to realise full physical properties. Vibrant or tint colours are achieved with colour pigments.

We made the lemon using Crystal Clear 200 + a yellow resin pigment.

CAUTION: NOT FOR HOME USE. THIS PRODUCT IS FOR INDUSTRIAL USE ONLY. Proper ventilation, A NIOSH Approved Respirator and Protective Clothing (gloves and long sleeves) are required to minimise the risk of inhalation and dermal sensitisation. If breathing is affected or a dermal rash develops, immediately cease using this product and seek medical attention. Read SDS before using.

• Pot life: 20 mins
• Demould: 16 hours (12mm - 75mm thick casting)
• Shore hardness: 80D
• Technical Bulletin
• Safety Data Sheet

Unfortunately, due to postal restrictions, we cannot send this item overseas.