Model Making Materials

1:12 wide cornice.

These moulding are suitable for use on architectural scale models, animation sets, action figure sets, larger scale diecast model dioramas and on dollhouse miniatures.

• Moulding dimensions: 22 x 9 x 915mm
• Cut with a fine-tooth saw.
• Using a mitre block if right-angle joints are required.
• Stain, if being used, should be applied before gluing in place.
• Use PVA to adhere to any absorbent surface, otherwise use a superglue (cyanoacrylate).

Prime with paint primer, sanding sealer or diluted PVA (allow to dry before painting) before applying the top coat.

This will stop the final finish soaking into the material giving a sub-standard finish.