Model Making Materials

Postcard models workshop / garage

A classic workshop or garage, with large doors and an outdoor stairway leading up to a small office or shop. Roller shutter door to the left and mezzanine floor with internal stairs inside the building. Corrugated roof and guttering.

• Kit includes: 2 sheets grey board building elements, Oilcard roof and other construction elements, Laser-cut ply staircase pieces, 6 strips clear acetate, Full instructions.
• Assembly & decoration required
• Scale: 1:148 / 1:150 / N Scale
• Model size: 125 x 65 x 52mm
• Difficulty: Moderate

To complete this kit you'll need: Cutting mat, scalpel, small file (nail file is fine), PVA glue & a selection of paints/marker pens

Notes:

• Some elements may be labelled with a name which differs from the model name – rest assured that the correct pieces are in your kit.
• There’s an image of the finished model at the back of the instruction leaflet.
• Read all the instructions through before starting your model
• Always fit a new scalpel blade to your knife before starting
• Use a file to remove any excess wood from the retaining tabs
• Paint the pieces before assembling (paint edges after removing from card) and touch up after you have put the model together
• Use a modelling square or the square grid on your cutting mat to ensure the assembled model is square (check at each stage of assembly)
• Assemble the model using the tabs
• Not a toy – not suitable for children