Model Making Materials

1:24 grey flagstones.

Individual real grey flagstones for pavements, stone floors & paths, for use on dollshouse projects, G scale model railway buildings & 1:24 scale dioramas.

• Flagstone size: 25.4 x 19mm
• Made from real stone.
• Make sure your floor surface is clean and dry, then lay your flagstones out until you are happy with their position, allow approx. 1mm for mortar joints. Remove loose dust with a damp cloth and apply PVA to the back of each piece and glue in place.
• Softer stone can be cut or shaped with a craft knife, simply score then snap over a straight edge. For harder stone you can use a junior hacksaw or tile pliers. To round edges rub onto medium grade abrasive paper.
• Allow the glue to dry thoroughly before proceeding to the next stage.
• Mix equal parts PVA and water together and using a brush, paint this over your flagstones. Allow to dry thoroughly. Your flagstones are now ready for grouting.
• Instructions for grouting can be found on the packet of our Mortar/Grout mix (see below).

A Stacey's Miniature Masonry product.