Model Making Materials

Brass square tubing.

304mm long brass tubes for architectural model making, engineering, frame construction, model railway, dioramas and other scratch building projects.

• See the drop down box above for available sizes*.
• Brass can be milled, drilled, sawed, and soldered.
• Cut using a tubing cutter, circular saw or with a hacksaw.
• If you don't want to solder, best joined using a two part epoxy or superglue.

Brass forms a greyish-green layer on the surface, which you should remove (sand, polish) before soldering. After polishing, to preserve the shine, apply a clear laquer to the surface. Our Workshop staff use Hycote Clear Gloss on their brass etching work.

*PLEASE NOTE: measurements given on drop down box are outer measurements.