Model Making Materials

Clear PETG plastic sheet

Clear PETG has a light transmission of 90%, the same as glass, use for glasing on architectural models, model railway buildings, dolls houses. Suitable for thermoforming.

• Sheet size 1.0 x 457 x 508mm
• Pack size: 3 sheets
• Single sheets of this white card can be bought from our shop on Leman Street London E1 8EU.
• Clear PETG also called extruded copolyester or Vivak.
• Can be cut to your artwork in our Laser Department

Storage

• Do not expose the sheet with the protective film to outside weathering.
• When stored in stacks, protect against heat, moisture and direct sunlight.

Thermoforming

• Vivak sheets are suitable for thermoforming at temperatures between 120°C and 160°C.
• Vivak sheets do not need to be pre-dried.
• Always remove the protective masking before heating the sheet.

Usage

• Vivak sheets should not be exposed to temperatures exceeding 65°C

Cleaning

• As soon as possible after installation, wash the sheet with lukewarm water containing a neutral detergent and subsequently rince it with clean water. Use a soft sponge, a wool cloth or a chamois for this purpose.
• Never use sharp objects to remove stains.