Model Making Materials

+44 (0)20 7264 1288


White Hexflex paint
White Hexflex paint
Hexflex (black!) on foamclay & plastazote
Hexflex (black!) on foamclay & plastazote


£2.36 inc.VAT
RRP £2.95
C&C available

White Hexflex paint.


Finish: Satin-Matt

Hexflex is a water-based, fully flexible, durable brush on paint devised for foam surfaces. It is Latex free, won't crack & cures with no tack.

Also available in white & clear (see below).

Hexflex is simple to use. You can apply straight to foam surfaces (you may want to heat seal first), but you can also apply to almost any surface including polystyrene, wood & fabrics. .

Hexflex is supplied thick, but can be thinned to the desired viscosity with water.

It can be thinned enough be used with an airgun.

  • Apply in thin coats.
  • Allow 3hrs between coats* (at room temperature).
  • Allow 12hrs for full cure of final coat* (at room termperature).

*Please note: drying times can be considerably improved (20-30mins) with a gentle hot air source (heat gun or hair drier etc). Drying times are estimates and may be quicker or slower depending on local conditions.

4D Model Shop uses cookies to help ensure your experience on our site is the best possible. Click here to read our Privacy Policy.
Please check the box to accept and close