Model Making Materials

Plastic Weld Solvent 300ml. 

This solvent sticks all normal model making plastics, i.e. perspex, ABS, butyrate, styrene, acrylic etc.

It has a long shelf life, is fast acting (grabs in seconds), and has a water-like consistency so it is best used by holding or clamping the surfaces together and running a loaded brush or applicator along the length of the joint (solvent will be drawn into the joint by capillary action). 

A second application can be made if required, but is not normally necessary.

Unfortunately, due to postal restrictions, we cannot send this product outside mainland UK.

• Plastic weld cement should be used in a well ventilated area
• Contact with skin or eyes should be avoided (wash well with water if this occurs).
• Plastic Weld may be applied by brush or applicator (see below).
• A syringe and needle is recommended for more precise application.
• The brush recommended has been tested for use with Plastic Weld and the adhesive in the ferrule is not affected by the solvent.
• To clean the brush, swish in the solvent and wipe immediately with a tissue.
• It is not possible to transport this item outside mainland UK as it is a hazardous liquid.
• This product is also available in a 57ml bottle (AM00001).

When joining dissimilar plastics, i.e. styrene to butyrate, the hardest material (in this case butyrate) should have the joint surface softened, by giving a light coat of solvent, prior to holding the surfaces together. Then proceed as normal.