Model Making Materials

+44 (0)20 7264 1288


Brass round tube for model making projects


From £3.65 inc.VAT

Brass round tube.

304mm long brass round tubes for architectural model making, engineering, animation, model railway, dioramas and other scratch building projects.


  • Brass can be milled, drilled, sawed, and soldered.
  • Cut using a tubing cutter, circular saw or with a hacksaw.
  • If you don't want to solder, best joined using a two part epoxy or superglue.
  • See the drop down box above for available sizes*.
  • Wall thickness 0.5mm except ST10501 (0.45mm).


Brass forms a greyish-green layer on the surface, which you should remove (sand, polish) before soldering. After polishing, to preserve the shine, apply a clear laquer to the surface. Our Workshop staff use Hycote Clear Gloss on their brass etching work.


*PLEASE NOTE: measurements given on drop down box are outer measurements.

4D modelshop uses cookies to help ensure your experience on our site is the best possible. Click here to read our Privacy Policy.
Please check the box to accept and close