Model Making Materials

Brass round tube.

1000mm long brass round tubes for architectural model making, engineering, animation, model railway, dioramas and other scratch building projects.

• Brass can be milled, drilled, sawed, and soldered.
• Cut using a tubing cutter, circular saw or with a hacksaw.
• If you don't want to solder, best joined using a two part epoxy or superglue.
• See the drop down box above for available sizes*.
• All wall thicknesses 0.5mm except for the following codes: ST10049 (0.2mm), ST10062 (0.3mm), ST10065 (0.4mm).

Brass forms a greyish-green layer on the surface, which you should remove (sand, polish) before soldering. After polishing, to preserve the shine, apply a clear laquer to the surface. Our Workshop staff use Hycote Clear Gloss on their brass etching work.

*PLEASE NOTE: measurements given on drop down box are outer measurements.